| How to update the firmware of REDFOX G51 Wizlib |
| Items Needed: |
- Updated REDFOX G51 Wizlib firmware (WizlibG51r2.img) from Redfox website
- MicroSD card (512MB minimum requirements)
- REDFOX G51 Wizlib
- Wizlib USB cable
|
| Instruction: |
| Note: Back-up the contents of the Wizlib before updating the firmware. |
- Using a PC, download the updated firmware of the REDFOX G51 Wizlib from WizlibG51r2.img. Save the file to your PC hard disk drive.
- Insert a MicroSD into the Wizlib.
- Plug one end of the USB cable to the Wizlib USB port and the other end to the USB port of the computer. Format the microSD card as FAT file system.
- After formatting the microSD card, copy the new firmware file of the REDFOX G51 Wizlib into the microSD card.
- Disconnect the Wizlib from the PC.
- Turn on the Wizlib. Continue pressing the "Power" button and the "OK" button until the power indicator lits and the Wizlib displays the upgrade mode of the Wizlib.
|
 |
| 7. Wait until the upgrading process is complete. The screen will prompt you if there is any error encountered. After the firmware has been upgraded, the Wizlib will restart automatically |
| |
| Important Notes: |
- Before doing the upgrade, make sure that the battery is fully charged.
- The Wizlib currently supports a maximum of 2G microSD card.
- Select FAT (not FAT32) when formatting the microSD card.
- Do not turn-off the unit while it is in the process of upgrading the firmware as this might corrupt the firmware or cause problems in the Wizlib.
|
